Set of 3 pieces Fortress - ABS Plastic Press Mold Bricks Wall Stone Art Design Decor

Mold made of impact-resistant ABS plastic, suitable for casting gypsum, cement-sand mortars and other mixtures with minimal adhesion to ABS plastic

€30.00 No tax
Add to compare0
Add to wishlist
Related products
No items

Form kit parameters:

The kit consists of:

The set consists of 6 molds for brick-tiles (plate for 2+2+2 elements)

Product size:

 32*10 cm. Thickness up to 1,5 cm.

Number of tiles per sq. m .:

1 m2 = 32 tiles.

Kit weight:

The weight of a set of forms is 0.5 kg.


Designed for 200-500 fillings

The approximate consumption of gypsum for 1 panels is 3-6 kg/1pcs

How to make 3d panels?

1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface.
2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum).
3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture.
4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel.
5. Look at the panel edges and remove bevels with putty knife if they appeared.
6. Leave panel to dry in a warm place (face side down or in vertical position).
7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.


Product Details
No comments



QR code


Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in