ELECTRODE (NOZZLE) FOR DARSONVAL Rectal Small

The direct electrode is lubricated with sterile petroleum jelly, carefully inserted into the corresponding cavity to a depth of 4-6 cm, and the input power is gradually increased until a pleasant sensation of warmth appears.

The dimensions of the working area of ​​the Large Rectal Electrode are equal to 90 millimeters with a diameter of 12 millimeters. The darsonvalization procedure itself must be carried out by a contact method, or by a labile or stable method. When carrying out the procedure, experimentally set the power of the device to such that a slight warmth will be felt. The large rectal electrode for darsonval is often used in conjunction with the small rectal electrode. (In this case, darsonvalization is first performed with a small nozzle, and then a large rectal nozzle is used to achieve a greater effect).

If you experience a burning sensation, you must immediately reduce the power to a comfortable level.

For convenience and practicality during use, the working part of the device is bent at an angle of 135 degrees. When using the presented electrode, it must be disinfected with a special solution and used only dry.

It is important to remember that it is forbidden to boil devices in hot water, since the implementation of such a procedure will damage its integral structure.